Seismic reliability assessment and the nonergodicity in the modelling parameter uncertainties     

Fatemeh Jalayer  Hossein Ebrahimian 《地震工程与结构动力学》2020,49(5):434-457

Modelling uncertainty can significantly affect the structural seismic reliability assessment. However, the limit state excursion due to this type of uncertainty may not be described by a Poisson process as it lacks renewal properties with the occurrence of each earthquake event. Furthermore, considering uncertainties related to ground motion representation by employing recorded ground motions together with modelling uncertainties is not a trivial task. Robust fragility assessment, proposed previously by the authors, employs the structural response to recorded ground motion as data in order to update prescribed seismic fragility models. Robust fragility can be extremely efficient for considering also the structural modelling uncertainties by creating a dataset of one-to-one assignments of structural model realizations and as-recorded ground motions. This can reduce the computational effort by more than 1 order of magnitude. However, it should be kept in mind that the fragility concept itself is based on the underlying assumption of Poisson-type renewal. Using the concept of updated robust reliability, considering both the uncertainty in ground motion representation based on as-recorded ground motion and non ergodic modelling uncertainties, the error introduced through structural reliability assessment by using the robust fragility is quantified. It is shown through specific application to an existing RC frame that this error is quite small when the product of the time interval and the standard deviation of failure rate is small and is on the conservative side.  相似文献   

Ambient vibration tools to validate the rigid diaphragm assumption in the seismic assessment of buildings     

Daniele Sivori  Marco Lepidi  Serena Cattari 《地震工程与结构动力学》2020,49(2):194-211

  相似文献   

大跨度钢管混凝土拱桥抗震性能指标研究          下载免费PDF全文

夏修身  杜骞  戴胜勇 《世界地震工程》2019,35(1):110-116

高轴压比钢管混凝土墩柱的试验结果对钢管混凝土拱肋具有较大的借鉴意义。为明确大跨度钢管混凝土拱桥的抗震性能指标，研究了高轴比钢管混凝土构件的破坏过程及延性性能。以弯矩作为性能指标将高轴压比钢管混凝土构件的试验破坏过程分为轻微损伤、有限损伤与严重损伤3个阶段，结合钢管混凝土截面性能状态的数值分析，探讨了高轴压比钢管混凝土构件的破坏机理。结果表明:高轴压比钢管混凝土构件具有一定的可用延性；提出了以计算等效屈服弯矩作为抗震性能指标，适当利用延性和实现钢管混凝土拱桥的有限损伤抗震设计，并给出了与有限损伤相关的截面性能状态及参数。研究成果弥补了规范在此方面的不足，可供高烈度地震区大跨度钢管混凝土拱桥抗震设计时参考。  相似文献   

基于纤维梁柱单元的桥梁墩柱地震反应模拟方法研究          下载免费PDF全文

赵泰儀  孙治国  石岩  郭迅 《世界地震工程》2019,35(1):117-127

为讨论利用纤维梁柱单元进行钢筋混凝土桥墩地震反应分析的建模方法，分别以4个悬臂式单柱墩和1个双柱墩拟静力加载试验，以及1个悬臂式单柱墩的振动台试验结果为依据，基于OpenSees数值分析平台建立了桥墩的地震反应分析模型。通过改变单元数量，分析了基于力的纤维梁柱单元和基于位移的纤维梁柱单元对桥墩地震反应的模拟精度。结果表明:对悬臂式单柱墩的拟静力和振动台试验，可沿墩高仅建立1个基于力的纤维梁柱单元，并在墩底串联1个考虑纵筋塑性渗透和粘结滑移的转动弹簧单元，即可获得很好的模拟结果。当采用基于位移的纤维梁柱单元时，应沿墩高至少建立2个单元，且塑性铰区至少有1个，才能保证获得较高的模拟精度。对双柱墩拟静力试验，采用基于力的纤维梁柱单元建模，沿每个墩高建立2个单元即可；以基于位移的纤维梁柱单元建模，建议沿每个墩高建立3个单元，且其中2个单元布置在塑性铰区。当数值模型可对静力滞回曲线取得很好的模拟结果后，该模型一般可对动力作用下墩顶最大位移和墩底最大剪力进行较为准确的模拟，但对墩顶残余位移的模拟精度无法保证。  相似文献   

Stripe-based fragility analysis of multispan concrete bridge classes using machine learning techniques     

Sujith Mangalathu  Jong-Su Jeon 《地震工程与结构动力学》2019,48(11):1238-1255

A framework for the generation of bridge-specific fragility curves utilizing the capabilities of machine learning and stripe-based approach is presented in this paper. The proposed methodology using random forests helps to generate or update fragility curves for a new set of input parameters with less computational effort and expensive resimulation. The methodology does not place any assumptions on the demand model of various components and helps to identify the relative importance of each uncertain variable in their seismic demand model. The methodology is demonstrated through the case study of a multispan concrete bridge class in California. Geometric, material, and structural uncertainties are accounted for in the generation of bridge numerical models and their fragility curves. It is also noted that the traditional lognormality assumption on the demand model leads to unrealistic fragility estimates. Fragility results obtained by the proposed methodology can be deployed in a risk assessment platform such as HAZUS for regional loss estimation.  相似文献   

Shaking table tests of a resilient bridge system with precast reinforced concrete columns equipped with springs     

Natalia Reggiani Manzo  Michalis F. Vassiliou  Harris Mouzakis  Efstratios Badogiannis 《地震工程与结构动力学》2022,51(1):213-239

This paper presents the shake table test results of a novel system for the design of precast reinforced concrete bridges. The specimen comprises a slab and four precast columns. The connections are dry and the columns are connected to the slab by an ungrouted tendon. One of the tendon ends is anchored above the slab, in series with a stack of washer springs, while the other end is anchored at the bottom of the column. The addition of such a flexible restraining system increases the stability of the system, while keeping it relatively flexible allowing it to experience negative post-uplift stiffness. It is a form of seismic isolation. Anchoring the tendon within the column, caps the design moment of the foundation, and reduces its size. One hundred and eighty-one shake table tests were performed. The first 180 caused negligible damage to the specimen, mainly abrasion at the perimeter of the column top ends. Hence, the system proved resilient. The 181^st excitation caused collapse, because the tendons unexpectedly failed at a load less than 50% of their capacity (provided by the manufacturer), due to the failure of their end socket. This highlights the importance of properly designing the tendons. The tests were used to statistically validate a rigid body model. The model performed reasonably well never underestimating the median displacement response of the center of mass of the slab by more than 30%. However, the model cannot predict the torsion rotation of the slab that was observed in the tests and is due to imperfections.  相似文献   

沉积盆地走滑构造的力学机制和变形特征     

陈书平  柳钧译  勾琪玮  袁浩伟 《地质论评》2022,68(5):1729-1742

走滑构造是地壳上最重要也是最复杂的构造之一,尽管经历了长期研究历史,但在其某些特征方面还存在着不确定认识。笔者等基于力学和脆性破裂理论以及安德森断层模式,分析了走滑构造的成因类型及相关构造的几何学特点。在总结走滑构造基本特征的基础上,说明了沉积盆地中大型走滑构造是基底先存断层或薄弱面复活形成,局部有新生型的,提出了准摩擦滑动的概念。明确了直扭、压扭和张扭的含义,并将亚简单剪切应用于分析断层活动。细化了各种构造的发育顺序,讨论了不同性质构造的形成条件,强调了构造几何关系与走滑带应力性质的关系。归纳了花状构造形成的构造部位,明确了走滑构造带结构及其主控因素,并用于地表和地下走滑构造的识别。  相似文献   

基于点云投影线探测的高墩位姿自动检测方法     

韩富庆  郭国和  杨承昆  吴勇生  王伟力  李彩林 《测绘通报》2021,(9):130-135,150

针对目前超高桥墩垂直度检测方法存在危险系数较高、精度难以保证或自动化程度与工作效率较低的情况,本文提出一种基于三维激光扫描技术的点云数据超高桥墩位姿自动检测方法。该方法首先将海量墩面点云双向分层;然后依条件选择分层文件探测点云投影线并划分桥墩面缓冲区;最后根据缓冲区自动提取墩面点云并进行位姿检测。本文以某山区高速桥梁高墩位姿检测为例进行试验,试验结果,表明该方法具有无接触测量、高自动化、高工作效率及检测范围全面的优势。  相似文献   

贵州乌江渡水电站至楠木渡磷迁移转化机制分析   总被引：1，自引：0，他引：1  

林少华  丁坚平  刘杰  潘盛泽 《地下水》2011,33(2):17-19

通过2009年3月～4月对排入乌江的废水水质监测结果进行分析,可以看出废水总磷浓度高、强度大且相当稳定,严重污染了乌江的水质.乌江总磷的主要来源是流域内磷化工企业排放的废水废渣且废水中大颗粒总磷含量高.本文通过乌江总磷的分布特征,总磷的存在形态,分析总磷在乌江的迁移转化机制.乌江总磷在迁移转化过程中主要是在水动力条件下...  相似文献   

既有铁路曲线整正测量   总被引：2，自引：0，他引：2  

全志强  杨育林 《测绘科学》2015,40(4):147-150

针对传统方法进行既有铁路曲线整正测量精度低、效率低、安全性差,难以满足维修养护中大机作业要求的问题,提出了将现代测绘技术应用于既有线测量的方法。建立全线统一的三维控制网,并加大轨道控制网点位密度,有效地方便了线路中心坐标采集以及调线作业;采用了初拟合与调整、考虑调线控制关键点、进一步细化拟合与调整的平面曲线优化方法;创造性地采用非接触性测量方法,进行桥梁偏心的精确测定。所提方法应用于数条长大既有线路进行实践检验的结果表明,曲线整正测量精度明显提高,并在面对复杂曲线时也能较为快速地拟合出拔量最小的优化曲线,其在生产中切实可行,能够满足现代化既有线维修养护需要。  相似文献